www.axismotion.com ® Downloads ® Editing Version for Windows
Axis Motion	Profile Cutting Control Systems

Profiler Downloads: Editing Version for Windows

The Windows editing version of Axis Motion Profiler is designed to be used on an office computer away from the actual profile cutting machine. Designs which are imported from a drawing package can be modified, saved and then reloaded into the original drawing package or sent to the machine for cutting. See the Profiler Software Overview for more information on the differences between the editing and machining versions of Axis Motion Profiler.

You can obtain a Windows editing version of Axis Motion Profiler by simply downloading the file from the table below. This software is a fully functioning editing version of Axis Motion Profiler except for the ability to save the drawings which you create. If you Register the editing version (which is free) then you will also be able to save the DXF drawing files which you create with the program.

The minimum System Requirements for the software are:

· a PC with at least a Pentium 200MHz processor (or equivalent) running Windows 95/98, Windows NT, Windows 2000 or Windows XP.

· 8 MB of RAM (32MB recommended)

· 5 MB of hard-disk space

MOST RECENT Editing Version for Windows(16-Dec-2004): Beta 6.5.D

Axis Motion Profiler Windows EDITING VERSION 6.5.D

INSTRUCTIONS:

0. Uninstall any previous version of Axis Motion Profiler (Windows edit version).

1. Download the file: wsetup65d.exe.

2. Run wsetup65d.exe. It will extract the installation files into a subdirectory called disk1.

3. To install the software run the file disk1/setup.exe

wsetup65d.exe

16-Dec-2004

1862KB

wsetup65d.exe is a self extracting file. It will extract to a subdirectory called disk1. To install the software run the file disk1/setup.exe.

Previous Editing Version for Windows(24-April-2003): Release 6.3.S

Several enhancements and fixes have been applied.
See Version Changes for a list of the changes to both the Machining software and the Windows editing software.

Axis Motion Profiler Windows EDITING VERSION 6.3.S

INSTRUCTIONS:

0. Uninstall any previous version of Axis Motion Profiler (Windows edit version).

1. Download the file: wsetup63s.exe.

2. Run wsetup63s.exe. It will extract the installation files into two subdirectories called disk1 and disk2. If installing from floppy disks then copy the files in disk1 to a floppy and the files in disk2 to a second floppy disk.

3. To install the software run the file disk1/setup.exe

wsetup63s.exe

24-April-2003

1927KB

wsetup63s.exe is a self extracting file. It will extract to two directories disk1 and disk2. To install the software run the file disk1/setup.exe.

[ Home | Profiler Software Overview | Manufacturing Applications | Hardware Overview | Downloads

(Last updated 13 Oct 2005)