Features:

• Value for money
• Compact Size
• Extremely Reliable
• Adjustable Motor Current
• Factory Tunable
• Adjustable Idle Current
• Opto-isolated Inputs
• Switch Selectable Step Size

The Axis Motion microstepping drive has been designed specifically for low cost and reduced resonance. Its compact size combined with high power output make it suitable for a wide range of applications. Unlike other microsteppers which are compromised so that they can be used on a wide range of motors, our drive can be factory tuned to suite your motor and torque requirements. It is ideal for applications such as X-Y-Z tables and is currently being used by some of the worlds leading routing machine manufacturers.

Integration into any system is made easy with industry standard step and direction inputs, which are opto-isolated to maximise noise immunity. We are committed to providing complete solutions for our customers and we have had motors designed specifically for use with routing and laser tables. These motors are also designed to run extremely well in conjunction with our drives. If you have any specific requirements we are always happy to look at your application and offer the best solution.

Supply Voltage

12-48VDC

Motor Current

0.3-4A

Adjustable with External Resistor

Microstep Resolution

4,8,16,32 usteps/step

Set using onboard dip switches

Step Frequency

> 1MHz

Idle Current

0-Motor Current A

Resistor adjustable to desired value

Operating Temp

0-70°C

Note: Microstepper may require external heat sink to keep unit within operating range.

Mechanical Size

94*81.2*35.6 mm

Including clips and capacitors

Pin

Name

Description

P1-1

+Ve

Input Supply Voltage

P1-2

Step

Step Input, Pulses of at least 100ns

P1-3

Dir

Direction Input

Pin

Name

Description

P2-1

PhaseB

Phase B motor output

P2-2

PhaseBB

Phase B Bar motor output

P2-3

Cred

Current Reduction Pin

P2-4

Cadj

Current Adjust Pin

P2-5

Gnd

Ground for Current Adjust

P2-6

Gnd

Earth Gnd

P2-7

Gnd

Supply Gnd

P2-8

Supply

Power Supply Input.  Absolute Max 48V.

P2-9

PhaseA

Phase A motor output

P2-10

PhaseAB

Phase A bar motor output